Categories
Cars Idle

Engine refresh – replacing hoses and turbo plumbing (day 15)

Today was a combination of working on plumbing for the 2.7t and preparing the 1.8t for removal.

I started with the fraying diverter valve hose. The passenger side hose was brand new… why didn’t the shop that replaced that also replace the aging part from the driver’s side?

I also started removing the hoses for driver’s side turbo in prep for putting the turbos back on. When I removed the turbos it was incredibly difficult to get into the hoses with the turbos in place. I’m currently planning to remove the turbos and their feeder lines from the engine to install the oil and coolant lines.

Finally I did a compression test on 1.8T engine in prep for removing then selling it. I took pictures and videos in the hope it would speed the sale of the engine if folks new it was in good health, well maintained and low mileage.

Time invested, 2 hours on hoses, 30 minutes on compression test… and 2 hours on getting compression tool back out of the engine (previous spark plug change hadn’t been done with anti-seize, I need look back at my records and never go back to that shop).